Keyholders are available in several lengths and custom lengths are also available on special order.
The use of RFID technology enables automatic and univocal identification of every keyholder, even when many of them are gathered together in a  security bag or security box. Any attempt to open or cut and reconnect the cable is permanently registered by the RFID chiptag and evidence of the tamper is given when the keyholder is read again, for instance during daily check at time when keyholders are brought back to the main office by the security staff.

TECHNICAL DRAWING

COLORI & PERSONALIZZAZIONI

* LOGISTIC VERSION AVAILABLE ON REQUEST

The post RFID Cable Keyholder appeared first on LeghornGroup India.

No residue void labels are the best solution for access control of the aircrafts doors, once they are parked or in storage. Moreover, these labels may also be used for cupboard trolleys, inspections panels, hatchways, duty-free packages, boxes, luggage and life jackets.

No residue void labels are specifically designed for not leaving any sticky residue on the surface to which they are applied to. However, once someone tries to remove them, the labels will reveal a message “VOID” that means they have been tampered with and cannot be applied once again. This avoids further checks, saving both time and money.

No residue Void security labels have a progressive numbering and can be supplied in different colours and sizes.

KEY FEATURES
– Clear evidence of tampering
– No residue
– High security
– Progressive numbering
– Easy to use

AVAILABLE STANDARD SIZE
20×11 mm
30×20 mm
40×20 mm
50×20 mm
60×30 mm
80×30 mm
80×40 mm
100×40 mm
120×50 mm
150×75 mm
200×80 mm

EXAMPLES OF REALIZATIONS

Tamper Evident Void labels is an effective solution for banks, airline companies and notaries.

The label has a progressive numbering and its is also possible to note the date o fuse with the name of the person that has applied it to the surface on a particular area. No residue void security labels are also suitable to secure air freight in order to obtain the Single Direction on Cargo (SDoC) issued by the Department of Transport, which has been in force since September 1^st 2009. It goes without saying that these labels are also suitable to seal the trailers cargo as per the DSoC requirement.

For further information, our technicians are always at your disposal

LeghornGroup also manufactures RFID no residue void tamper evidence labels.

The post Void tamper evident label with no residue appeared first on LeghornGroup India.

Ultra Destructible Tamper Evident Labels are a unique tamper proof security labels for excellent high bond adhesion and confirmability to smooth or curved irregular surfaces. When the destructible labels are tampered against removal and are easily damaged, causing cracking and cause multiple chipping effect in tits and bits leaving behind the evidence of tampering. LeghornGroup since forty years specialized in tamper prevention systems. Among security labels, ultra-destructible labels cover a very important role. They completely flake off when attempting to remove them from the surface which they are applied to.

We are able to manufacture also very small labels: a few millimeters of size or diameter.

Where to apply the labels

This type of labels is very much used by mobile and tablet repair and service centers, but are also used in the food, plumbing or banking sectors. We can produce them in sheets of any size, with any shaping on demand, or in reels.

Labels may be printed with bar code or a progressive numbering and they can also be manufactured by embedding RFID technology.
In this case, they would be named RFID ultra destructible labels.
The material used to produce ultra destructible labels is extremely fragile and breaks into hundreds of pieces if someone tries to remove them.
Ultra destructible labels are applicable on most surfaces.

Customisation

Choosing the right size and the right color for your labels means adding value to your brand.
An eye-catching logo, a clear message, and contacts well in sight: you will get a powerful tool to communicate with great effectiveness.
Your ultra destructible labels, together with providing you with tamper protection, will keep your company in the spotlight and let other customers get in touch with you.

However, LeghornGroup can offer in-house graphical service, to realize any kind of customers’ ideas.
With our experience in the field of counterfeiting, we will help you to choose carefully the material to create the most appropriate labels for your business.

Ultra destructible labels are tamper evident products that avoid discussions and misunderstandings. A small investment with a great return.

TECHNICAL DRAWING

STANDARD SIZES
20×11 mm
30×20 mm
40×20 mm
50×20 mm
60×30 mm
80×30 mm
80×40 mm
100×40 mm
120×50 mm
150×75 mm
200×80 mm

MATERIAL
Paper
Polyetilene

COLOURS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Ultra destructible tamper evident labels appeared first on LeghornGroup India.

VOID TAMPER EVIDENT LABEL of LeghornGroup is specifically designed to provide evidence of unauthorised tampering. LeghornGroup VOID LABEL can be applied both on smooth and rough surfaces. Once the Void tamper evident security label has been removed from the surface, it leaves a film behind showing a void/open message as evidence of tampering.

Numbering

These labels are supplied in different sizes and have all a progressive numbering.
The provide a high level of security by leaving a void message on the surface they have been applied to.
They can be used for different purposes that require a high level of security.

Where to apply labels

Void tamper evident security labels are widely used by hardware and mechanical objects manufacturers. In addition, also repair workshop and assistance laboratories use them. These labels have also a great importance for pharmaceutical industry, both for sealing special drug boxes and for laboratory test tubes.

In the transport field, these labels are used to seal boxes.
Void tamper evident labels are also used to ensure products authenticity.
An intact void security label guarantees that the product to which it has been applied to has not been tampered with.
It is also recommended to use a progressive numbering and note where the label has been applied to.

Examples of realisation

LeghornGroup can satisfy any customer’s requirement, from labels size, colours and shake. Void tamper evident security labels can be printed with logo, barcode and progressive numbering. LeghornGroup technicians are always at your disposal for any request concerning VOID security labels.

STANDARD SIZES
20×11 mm
30×20 mm
40×20 mm
50×20 mm
60×30 mm
80×30 mm
80×40 mm
100×40 mm
120×50 mm
150×75 mm
200×80 mm

MATERIAL
Paper
Polyetilene

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Void tamper evident label with residue appeared first on LeghornGroup India.

TECHNICAL DRAWING

SIZE
Length: 44.5 mm (1” 3/4”)
Width: 34 mm (1” 11/32”)
Hasp diameter: 2.5 mm (3/32”)

COLOURS & CUSTOMIZATIONS

MARKING
– Laser marking
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request

PACKAGING
Cartons of 5000 seals
Carton dimensions: 55 x 36 x 27 cm (21” 21/32” x 14” 11/64” x 10” 5/8”)
Carton weight: 8 kg (17 lb)

The post CALAIDE SEAL appeared first on LeghornGroup India.

The closure of the Tamper Evident Envelopes PAC SAFE is realized with an extra strong glue. It also has a double numbering: on the surface of the envelope that you will send, and on the coupon that you will keep to track the shipment.

Be sure that the closing system is activated along its whole length.

Once the closing system is activated, it is impossible to open the envelope without damaging it in a very evident way.

No tampering attempt will be success full.

EACH ENVELOPE IS PROGRESSIVELY NUMBERED AND THERE IS NO HONEST WAY TO REPRODUCE IT

SIZE
200 x 260 + 35 + 35 mm
275 x 400 + 35 + 35 mm
350 x 460 + 35 + 35 mm
The last measure refers to the security coupon.
This security envelope can be personalized with one or more colours.

MARKING OPTIONS
– The customization is realizable for 30% of the surface of the envelope
– Mininum quantity customizable: 10.000 pcs
– EACH ENVELOPE IS PROGRESSIVELY NUMBERED AND THERE IS NO HONEST WAY TO REPRODUCE IT.

The post Tamper Evident Envelopes Bag Safe appeared first on LeghornGroup India.

Our BAG SAFE PLUS (VOID) envelopes hide their numbering in the inside.
The numbering is guaranteed to be unique and there is no way to modify it.
Maximum security is assured by the closing system: if you try to tear off the closing tape, it will show the tampering attempt.
May be personalized with one or more colors.
Width of the envelope: from 6 to 10 micron.

SIZE
200 x 290 + 30 mm
270 x 420 + 30 mm
350 x 460 + 30 mm
Once you have torn off the tape, it will not stick and it will be impossible to hide the tampering attempt.

MARKING OPTIONS
– The customization is realizable for 30% of the surface of the envelope
– Mininum quantity customizable: 10.000 pcs
– EACH ENVELOPE IS PROGRESSIVELY NUMBERED AND THERE IS NO HONEST WAY TO REPRODUCE IT.

The post Tamper-Evident Security Envelopes BAG SAFE PLUS (Void) appeared first on LeghornGroup India.

SIZE
Art: MADRID 15 Cm: 15×10 (5” 29/32” x 3” 15/16”)
Art: MADRID 20 Cm: 20×10 (7” 7/8” x 3” 15/16”)
Standard dimensions of “MADRID” bag can be  modified on customer’s request

TECHNICAL DRAWING

MATERIAL
Nylon  840
Nylon  210

COLOURS & CUSTOMIZATIONS

MARKING OPTIONS
– SERIGRAPHIC PRINT
– One, two or three colours  print
– Logos available upon request

ADDITIONAL INFO
– “MADRID” bag can be closed with a bag security seal called  ZIPSTOP
– This is a plastic seal to stop the closure of the security bag when the head is inserted into the zip, the zip is blocked and to move the zip it is necessary to break the seal
– ZIPSTOP is a consequentially numbered security seal.
– BAR CODE is Also available
– The only way to open the bag is to break the security seal

The post NIGHT DEPOSIT SECURITY BAG (Madrid) appeared first on LeghornGroup India.

TECHNICAL DRAWING

SIZE
Art: Oslo 5 Cm (1” 31/32”): 35 (B) x 5 (L) x 30 (H) (13” 25/32” x 1” 31/32” x 11” 13/16″)
Art: Oslo 10 Cm (3” 15/16”): 35 (B) x 10 (L) x 30 (H) (13” 25/32” x 3” 15/16” x 11” 13/16”)
Available also in custom size on client’s demand.

MATERIAL
Nylon  800

COLOURS

MARKING OPTIONS
– SILK-SCREEN PRINTING
– Possibility of printing by one, two or three colours
– Marking with logo on request

The post SECURITY DEPOSIT BAG (Oslo) appeared first on LeghornGroup India.