Utilities - LeghornGroup India

GALVANIZED STEEL WIRE

v.anei — Sat, 14 Dec 2019 11:32:24 +0000

The 1mm diameter galvanized sealing wire for seals is the most used in the field of wire seals.
Its spiral shape is suitable for being used with lead seals and the related lead seal press.
Once the lead seal is pressed down correctly, pulling out the seal would not be possible.
We generally supply galvanized sealing wire in various reels weight and in parts which vary from 10 to 150 cm long.

TECHNICAL DRAWING

MATERIAL CLASSIFACTION
GALVANIZED STEEL ANNEALED

CHEMICAL BREAKDOWN

C %	Mn %	P %	S %
0.08	0.045	0.035	0.035

COLOURS

COMPOSITION
Core wire: Ø 0.50 mm
Spiral wire: Ø 0.30 mm

MECHANICAL CARACHTERISTICS: TOTAL DIAMETER / BREAKING LOAD

STANDARD DIAMETER mm	TOLLERANCE Ø	BREAKING LOAD N/mm²
1.00	10%	300/450

STRENGTH PER METRE: 2,45g (1 Kg = 400 m ca)

STRUCTURAL CARACTHERISTICS
COIL DISTANCE: 2.00 mm (50 coils per 100 mm)

SURFACE CARACHTERISTICS
– SURFACE SATE: ZINC COATING
– Minimum zinc coating 20gr/m2

RELATED PRODUCTS

The post GALVANIZED STEEL WIRE appeared first on LeghornGroup India.

STAINLESS STEEL WIRE

v.anei — Sat, 14 Dec 2019 11:32:24 +0000

Seven stainless steel wire diam: 0,32 mm. transparent plastic covered.
Total diam 0,90 mm
Inox Steel cable approximate weights and lengths
1kg reel is equal to 406m
250m reel is equal to 675g
500m reel is equal to 1440g
1000m reel is equal to 2960g

TECHNICAL DRAWING

1 MM DIAMETER STAINLESS STEEL SEALING WIRE TECHNICAL DATA.

GRADE	N.W.	TS	EL
	(kg)	(Mpa)	(%)
304	483.88	785	45

1 MM DIAMETER STAINLESS STEEL SEALING WIRE CHEMICAL COMPOSITION (%).

C	Si	Mn	P	S	Cr	Ni
0.03	0.46	1.30	0.026	0.008	18.23	8.03

The post STAINLESS STEEL WIRE appeared first on LeghornGroup India.

COPPER SEALING WIRE

v.anei — Sat, 14 Dec 2019 11:32:24 +0000

Wire seals and their sealing wire are particularly suitable in the fuel handling field.
All the sealing wires can be used, but in this field a copper sealing wire is more advisable to avoid any possibility of sparking while using it.
Also this copper wire has a spiral shape and a diameter of 1 mm.
It is extremely flexible and once the seal is pressed down on the sealing wire, it cannot be pulled out without breaking it.
We generally supply it in various reels weight and in parts which vary from 10 to 150 cm long.

TECHNICAL DRAWING

MATERIAL CLASSIFACTION
RED COPPER ANNEALED ASTM B 49,92 – UNI EN 1977 – 2000

CHEMICAL BREAKDOWN

Cu	Fe	Pb	As	Ag	Ni	Sn	S
99,974	0,0035	0,0013	0,0011	0,011	0,0008	0,0009	0.004

COLOURS

COMPOSITION
Core wire: Ø 0.50 mm
Spiral wire: Ø 0.30 mm

MECHANICAL CARACHTERISTICS: TOTAL DIAMETER / BREAKING LOAD

Standard Diameter mm	TOLLERANCE Ø	BREAKING LOAD N/mm²
1.00	10 %	210/220

STRENGTH PER METRE: 2,78g (1 Kg = 360 mt appx – 2 .3 lb = 1,213 ft.)

STRUCTURAL CARACTHERISTICS
COIL DISTANCE: 2.00 mm (50 coils per 100 mm)

SURFACE CARACHTERISTICS
SURFACE SATE: GLOSSY

ELONGATION
23-23%

RELATED PRODUCTS

The post COPPER SEALING WIRE appeared first on LeghornGroup India.

Security meter seal TWIST SEAL

v.anei — Sat, 14 Dec 2019 06:01:46 +0000

Security meter seal TWIST SEAL

Completely plastic seal supplied both with and without sealing wire. The exterior part is made of transparent plastic for better controlling the locking mechanism. To secure rotate 360° the handle of the seal. Once closed, it is recommended to snap off the handle. It is impossible to tamper the seal once it is secured.

Types of printing:

Standard

Double numbering

Barcode

Data Matrix

The following sealing wires are suitable for TWIST SEAL:
– galvanised sealing wire
– stainless steel
– brass
– copper
– nylon copper

TECHNICAL DRAWING

MATERIAL
Polycarbonate
ABS

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
Plastic bags of 100 pcs in boxes of 2000 pcs each.
Size: 40×30×20 cm
Box weight: 7 kg

The post Security meter seal TWIST SEAL appeared first on LeghornGroup India.

UHF/HF/NFC RFID Meter seal ANCHORFLAG

v.anei — Sat, 14 Dec 2019 06:01:41 +0000

ANCHORFLAG RFID meter seal from LeghornGroup is made of plastic material with high mechanical resistance.

The transparent plastic allows a visual check of the closing mechanism of this seal for meters. Like all RFID tags, this seal for meters also has a unique code that is not clonable and not accessible since the chip is part of the plastic body.

Suitable for:

Water meters
Gas meters
Electrical meters

UHF
– RF protocol: EPC Class 1 Gen2 – ISO/IEC 18000-6C
– Integrated Circuit(IC): IMPINJ Monza 3; Read/Write
– Memory: EEPROM
– Operating Frequency: 860 – 960 MHz – UHF Global
– Protection: IP66
– Operating temp: -20°C to +80°C
– Storage temp: -20°C to +80°C
– Tag dimension: 12×30 mm
– Resistance harsh factory environment
– Reading distance: Typical reading with handheld reader: 5 – 15 cm

TECHNICAL DRAWING

MATERIAL
Polycarbonate
Polystirene

COLORS & CUSTOMIZATIONS

MARKING OPTIONS
– LASER PRINT
– Sequenced numbering up to 15 digits
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
4.000 seals per carton
carton size: 56×24×46 cm
carton weigth: 12 kg

The post UHF/HF/NFC RFID Meter seal ANCHORFLAG appeared first on LeghornGroup India.