Wire security seals - LeghornGroup India

Meter seal ANCHORCLICK SEAL with wire in-ya

nisfoian — Fri, 31 Jan 2020 17:16:24 +0000

Thin wire of 0.6 mm suitable to enter into small holes.
Wire length can be variable.
Serial number laser marked on both body and plunge increase security levels.
Barcode should be possible.
Wire attached to seal hence easy to handle.No pliers or tools required to close the sew.
Possible to use a fragile wire made of MS or Plastic for easy break off for Airlines and Fire extinguishers.
Possible to use a strong wire of SS in applications where more strength is required.

TECHNICAL DRAWING

SIZE
Diameter : 12.5 mm
Length : 23 mm
Label: 27×15 mm

SEQUENTIAL NUMBERING AND CUSTOMISATION
Laser printing on both sides of the body

COLORS & CUSTOMIZATIONS

MATERIAL
Body: Polycarbonate.
Wire: Stainless Steel Polystyrene

AVAILABLE COLORS
Fully transparent

PACKING
Carton with 1000 pieces.
Carton dimensions:
Carton weight:

The post Meter seal ANCHORCLICK SEAL with wire in-ya appeared first on LeghornGroup India.

Meter seal ANCHORCLICK SEAL in-ya

nisfoian — Fri, 31 Jan 2020 15:31:11 +0000

Thin wire of 0.9 mm suitable to enter into small holes. Wire length can be variable.
Serial number laser marked to increase security levels.
Barcode should be possible.
No pliers or tool required to close the seal.
Big surface area enables no grips available for opening the seal. The parts are totally encapsulated within each other marking it difficult to tamper.
Possible to use a fragile wire made of MS or Plastic.
Possible to use a strong wire of SS in applications where more strength is required.

TECHNICAL DRAWING

SIZE
Diameter : 12.5 mm
Length : 23 mm
Label: 27×15 mm

SEQUENTIAL NUMBERING AND CUSTOMISATION
Up to 7 digits (laser printed). Barcode Available

COLORS & CUSTOMIZATIONS

MATERIAL
HDPE( High-density polyethylene)

AVAILABLE COLORS
Orange – yellow – purple – white – red, other colors available on request.

PACKING
Carton with 3000 seals

The post Meter seal ANCHORCLICK SEAL in-ya appeared first on LeghornGroup India.

Security meter seal TWIST SEAL

v.anei — Sat, 14 Dec 2019 06:01:46 +0000

Security meter seal TWIST SEAL

Completely plastic seal supplied both with and without sealing wire. The exterior part is made of transparent plastic for better controlling the locking mechanism. To secure rotate 360° the handle of the seal. Once closed, it is recommended to snap off the handle. It is impossible to tamper the seal once it is secured.

Types of printing:

Standard

Double numbering

Barcode

Data Matrix

The following sealing wires are suitable for TWIST SEAL:
– galvanised sealing wire
– stainless steel
– brass
– copper
– nylon copper

TECHNICAL DRAWING

MATERIAL
Polycarbonate
ABS

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
Plastic bags of 100 pcs in boxes of 2000 pcs each.
Size: 40×30×20 cm
Box weight: 7 kg

The post Security meter seal TWIST SEAL appeared first on LeghornGroup India.

UHF/HF/NFC RFID Meter seal ANCHORFLAG

v.anei — Sat, 14 Dec 2019 06:01:41 +0000

ANCHORFLAG RFID meter seal from LeghornGroup is made of plastic material with high mechanical resistance.

The transparent plastic allows a visual check of the closing mechanism of this seal for meters. Like all RFID tags, this seal for meters also has a unique code that is not clonable and not accessible since the chip is part of the plastic body.

Suitable for:

Water meters
Gas meters
Electrical meters

UHF
– RF protocol: EPC Class 1 Gen2 – ISO/IEC 18000-6C
– Integrated Circuit(IC): IMPINJ Monza 3; Read/Write
– Memory: EEPROM
– Operating Frequency: 860 – 960 MHz – UHF Global
– Protection: IP66
– Operating temp: -20°C to +80°C
– Storage temp: -20°C to +80°C
– Tag dimension: 12×30 mm
– Resistance harsh factory environment
– Reading distance: Typical reading with handheld reader: 5 – 15 cm

TECHNICAL DRAWING

MATERIAL
Polycarbonate
Polystirene

COLORS & CUSTOMIZATIONS

MARKING OPTIONS
– LASER PRINT
– Sequenced numbering up to 15 digits
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
4.000 seals per carton
carton size: 56×24×46 cm
carton weigth: 12 kg

The post UHF/HF/NFC RFID Meter seal ANCHORFLAG appeared first on LeghornGroup India.