The plastic enclosure of the seal, in robust ABS material, embeds an electronic chiptag  with unique code that not only enables the automatic identification of any container or transport vehicle, which the seal is attached onto, but enables also immediate, easy and reliable readings of the integrity status of the seal, by giving information about any tamper evidence.

RFID ANTI-TAMPER SEAL is the step ahead in front of already existing RFID SEAL

CABLE SEAL RFID ANTI-TAMPER:

• Is a High Security Seal;
• Univocally identifies the container or the vehicle to which it is attached;
• Can be easily and reliably read by fixed reading units placed at transit gates or by handheld reading units manually operated by inspectors and gives back it unique code as a basic RFID seal;
• When compared to standard RFID seals, tamper evident RFID seals are able to permanently store into their memory the tamper event by activating a status bit named TAG TAMPER ALARM, thus providing immediate information about seal status at readings (tampered/not tampered);
• Can store additional information but the ID code, also in password-protected mode, by using same devices that are used for the reading operation;

TECHNICAL DRAWING

COLORS & CUSTOMIZATIONS

* LOGISTIC VERSION AVAILABLE ON REQUEST

The post ANTI-TAMPER RFID cable seal appeared first on LeghornGroup India.

LeghornGroup specialized in IMO and ADR hazardous goods labels and packaging solutions for dangerous goods transportation industry. We have a wide range of hazard warning diamonds (Haz-Chem Labels) which are typically available in 48 hours from the order.

These ADR and IMO adhesive hazard class labels include all classes of hazard and flammability, Environmentally Hazardous labels and those related to the danger to marine pollution according to IMDG regulations.

Dangerous goods are divided into nine hazard classes.
Hazard classes define the type of hazard associated with goods.
Many goods fall into more than one class of danger.

TECHNICAL DRAWING

Here below the classes of Hazard labels:

The International Maritime Dangerous Goods Code (IMDG Code) establishes the package applicable conditions for the safe transport of marine hazardous and polluting goods (including tanks/tank containers) and bulk solids.
Vehicles carrying dangerous goods on ferries (both international routes and in UK waters, e.g. to and from islands) must meet the requirements of the IMDG Code.

On the basis of the Un Orange Book Model Regulations, the IMDG Code is published by the International maritime Organisation (IMO) and is revised every two years.

EXAMPLES OF USE

Examples of hazard class labels

Once dangerous goods are transported via container by sea must have the correct hazard class label. The container must be labeled as required by the IMDG regulation for maritime transport.
Here below some useful examples of the correct labeling.

EXAMPLE 1

	Example 1 a Dangerous goods: Limited quantity. For Limited Quantity goods which are also dangerous for the environment, the mark of marine pollutant is no longer required.
	Example 1 b Dangerous goods: Container loaded with dangerous goods for the environment with UN number 3082 in quantities greater than 4000 kg of gross mass.
	Example 1 c Dangerous goods: Container loaded with class 1 goods For goods of class 1 the UN number is not required whatever the quantity transported.

EXAMPLE 2

	Example 2 a Dangerous goods: Container with goods belonging to the same class (in this example class 3) but with a different UN number Or goods with the same UN number but in quantities less than 4,000 kg.
	Example 2 b Dangerous goods: Container loaded with goods having the same UN number (in this example UN1266) but in quantities greater than 4000 kg of gross mass.
	Example 2 c Dangerous goods: Container loaded with goods having the same UN number (in this example UN1266) but in quantities greater than 4000 kg of gross mass.

EXAMPLE 3

	Example 3 a Dangerous goods: Containers with goods of different class, or with goods having a secondary risk. Here, for example with goods class 3, 8 and 9.
	Example 3 b Dangerous goods: Containers with Marine Pollutant goods that do not correspond to UN numbers 3077 and 3082. In this example the container contains organic peroxides dangerous for the environment.
	Example 3 c Dangerous goods: Container loaded with goods under fumigation. (UN number 3359).

In case you do not find the specific product for your needs, please contact us.
One of our experts will help you solve the problem.

The post Hazard class labels – ADR and IMO appeared first on LeghornGroup India.

 Real time alerting and recording of any access to the goods transported or stored: opening, closing or tampering (device ID, type of event, date and time).
It has a  long operation time thanks to its long-lasting battery, rechargeable via USB and easy to replace by the user.
GPS tracking for location, control, geofencing.

eLOCK GOLD is an advanced electronic reusable security lock, to control position and status of trucks and containers, either from fixed station or from mobile devices (smart phone and tablet).

eLOCK GOLD sends an SMS  alert any time the lock registers an event of opening/closure, tampering attempt (e.g. the cable is being cut), battery is low. Alert message includes ID, event type, GPS coordinates for the place the event took place at, and time stamp.

Designed as evolution of LeghornGroup e-LOCK GOLD product, which is on the market since more than 5 years, offers an improved user experience – in addition to the existing model ability to obtain logistic identification information in real time.

• Completely renewed plastic case to strengthen its resistance to mechanical shocks, dust and water (IP66 equivalent)..
• Lithium battery, rechargeable via USB, of longer duration and replaceable by the user.
• Facilitated insertion of SIM card.
• Possibility to check the device functionalities thanks to the use of three front and multicoloured LEDs which report the user the battery status and GPS/GPRS communications.
• The employment of a last generation GPS module that allows to consistently reduce warm up periods and detect/track indoor positions (ex. in a warehouse).
• Possibility to download the recorded event log (more than 3500) from the device memory, throughout USB interface.
• Easier connection to PC.

How does eLOCK GOLD work?

Thanks to its advanced technical features, eLOCK GOLD can send an SMS to a set of selected numbers or communicate via web platform  if an event occurs and allows you to enable features of:

• MONITORING, thanks to its ability to communicate in real-time with IT systems for logistics and transport, it informs about the complete data on fleets and individual vehicles
• ANALYSIS of the data for the entire fleet relating to individual drivers, with the possibility of intervention and planning of activities..
• CONTROL, through real-time access to data on vehicles and drivers, and to the position marked on the map by using GPS tracking.

Used together a web-based èlatform for fleet tracking and management, it is a powerful tool to monitor vehicles and goods.

Technical specifications

• Dimension: 106,6×156,1×44,5 mm
• Material: High-resistant polycarbonate
• Power supply: 5 VDC
• Working voltage: 3,3 VDC
• Average current: 80 mA
• Current in standby mode: 15 uA
• Internal battery: 4,2 VDC 6600 mAh – Lithium battery, rechargeable via USB
• Working hours
• Two data per day: 4 years
• Ten data per day: 1 years
• Continuous every 10 minutes: 10 days
• Stand by > 10 years
• CPU Microcontroller System on Chip Cypress ARM Cortex-M3
• GSM GSM/GPRS module: Quectel M95
• Frequency band Quad-band: GSM850, EGSM900, DCS1800, PCS1900 MHz
• Antenna Internal antenna
• GPS Compact GNSS Module, U-blox SAM-M8Q-0-10 GPS + GLONASS
• Positioning accuracy: 2,5 m (8 ft)
• GPS sensitivity 165dBm@Tracking, -158dBm@Acquisition, -146dBm@ColdStart , -155dBm@HotStart
• Positioning time: Cold Start <26s; Hot Start <1s
• Satellite receiving channel: 72 channels
• Antenna embedded patch antenna
• LED indicator: for GSM / GPS status and battery charge
• Operating temperature: -15°C to 60°C
• Storage temperature: -20°C to 60°C
• Cable material insulated plastics, anti wringing, anti cutter
• Cable length: 75 cm
• Closure pin spring blocking system
• Security Possibility to block the system by using seals
• Log memory Last 3650 data recorded
• Data program /Data download/Firmware upgrade: via USB

 Information for customers to have access to our after-sales service and warranty conditions

The post Reusable electronic security seal eLOCK GOLD appeared first on LeghornGroup India.

We offer medium to high volumes of barcode labels on rolls and sheets with multiple colors for healthcare & pharmaceutical companies, courier & logistics sectors, print management firms, libraries and document management businesses, the security sector, and PAT, IT and serial numbering applications.

Color can be added as required, and we pay the utmost care to ensure that the sequence of variable data you send us from a database of CSV file is precisely reflected in the labels we produce.

Barcode labels offer a unique identification method that can benefit any environment that handles a continuous flow of products or goods.

To ensure ease of tracking though various distribution chains, barcode labels clearly identify stock items as well as being durable enough to withstand the rigours of transportation and handling.

BAR CODE 39 – CODE 39 is an alphanumeric symbology with some ASCII characters available.

Although it is a self checking symbology, check characters may be used when number integrity has a high priority.

BAR CODE 49 – CODE 49 is an ultra high-density two dimensional code (multiple-row) symbology of variable length.

BAR CODE 93 – Code 93 is compatible with Code 39 but uses a smaller space to represent a character.

A label produced in Code 93 is approximately 25% shorter than the same label produced in Code 39.

BAR CODE 128 – Code 128 is an alphanumeric symbology which is variable in length with two error-checking alternatives.

The first is an individual character level using character self-checking parity. The second is a complete message using the calculated, end of message, check digit.

BAR CODE INTERLEAVED 2 0f 5 – Interleaved 2 of 5 is a numeric-only symbology.

The “interleaved” refers to the fact that two characters can be represented in the same space by using the black bars to represent

the first character and the white spaces to represent the second character.

BAR CODE CODEBAR Traditional Codabar – Traditional Codabar is a numeric symbology that must use a check digit to assure accuracy.

It is variable in length and uses 16 data characters plus any of 4 start and stop characters. In order to ensure accurate decodes, Codabar is customarily printed at 10.0 cpi.

COLOURS

COURIER BAR CODE LABELS

PERSONALIZED ADHESIVE LABELS AND BAR CODE IN ROLL

CUSTOMIZED ADHESIVE LABELS AND BAR CODE IN SHEETS

CUSTOMIZED ADHESIVE LABELS AND BAR CODE STANDARD SIZES

The post Bar code labels appeared first on LeghornGroup India.

LEGHORN uses a variety of 3M and other industry-leading adhesives so its labels adhere to a number of different surfaces.

COLOURS & CUSTOMIZATIONS

The post Asset labels appeared first on LeghornGroup India.

No residue void labels are the best solution for access control of the aircrafts doors, once they are parked or in storage. Moreover, these labels may also be used for cupboard trolleys, inspections panels, hatchways, duty-free packages, boxes, luggage and life jackets.

No residue void labels are specifically designed for not leaving any sticky residue on the surface to which they are applied to. However, once someone tries to remove them, the labels will reveal a message “VOID” that means they have been tampered with and cannot be applied once again. This avoids further checks, saving both time and money.

No residue Void security labels have a progressive numbering and can be supplied in different colours and sizes.

KEY FEATURES
– Clear evidence of tampering
– No residue
– High security
– Progressive numbering
– Easy to use

AVAILABLE STANDARD SIZE
20×11 mm
30×20 mm
40×20 mm
50×20 mm
60×30 mm
80×30 mm
80×40 mm
100×40 mm
120×50 mm
150×75 mm
200×80 mm

EXAMPLES OF REALIZATIONS

Tamper Evident Void labels is an effective solution for banks, airline companies and notaries.

The label has a progressive numbering and its is also possible to note the date o fuse with the name of the person that has applied it to the surface on a particular area. No residue void security labels are also suitable to secure air freight in order to obtain the Single Direction on Cargo (SDoC) issued by the Department of Transport, which has been in force since September 1^st 2009. It goes without saying that these labels are also suitable to seal the trailers cargo as per the DSoC requirement.

For further information, our technicians are always at your disposal

LeghornGroup also manufactures RFID no residue void tamper evidence labels.

The post Void tamper evident label with no residue appeared first on LeghornGroup India.

Ultra Destructible Tamper Evident Labels are a unique tamper proof security labels for excellent high bond adhesion and confirmability to smooth or curved irregular surfaces. When the destructible labels are tampered against removal and are easily damaged, causing cracking and cause multiple chipping effect in tits and bits leaving behind the evidence of tampering. LeghornGroup since forty years specialized in tamper prevention systems. Among security labels, ultra-destructible labels cover a very important role. They completely flake off when attempting to remove them from the surface which they are applied to.

We are able to manufacture also very small labels: a few millimeters of size or diameter.

Where to apply the labels

This type of labels is very much used by mobile and tablet repair and service centers, but are also used in the food, plumbing or banking sectors. We can produce them in sheets of any size, with any shaping on demand, or in reels.

Labels may be printed with bar code or a progressive numbering and they can also be manufactured by embedding RFID technology.
In this case, they would be named RFID ultra destructible labels.
The material used to produce ultra destructible labels is extremely fragile and breaks into hundreds of pieces if someone tries to remove them.
Ultra destructible labels are applicable on most surfaces.

Customisation

Choosing the right size and the right color for your labels means adding value to your brand.
An eye-catching logo, a clear message, and contacts well in sight: you will get a powerful tool to communicate with great effectiveness.
Your ultra destructible labels, together with providing you with tamper protection, will keep your company in the spotlight and let other customers get in touch with you.

However, LeghornGroup can offer in-house graphical service, to realize any kind of customers’ ideas.
With our experience in the field of counterfeiting, we will help you to choose carefully the material to create the most appropriate labels for your business.

Ultra destructible labels are tamper evident products that avoid discussions and misunderstandings. A small investment with a great return.

TECHNICAL DRAWING

STANDARD SIZES
20×11 mm
30×20 mm
40×20 mm
50×20 mm
60×30 mm
80×30 mm
80×40 mm
100×40 mm
120×50 mm
150×75 mm
200×80 mm

MATERIAL
Paper
Polyetilene

COLOURS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Ultra destructible tamper evident labels appeared first on LeghornGroup India.

VOID TAMPER EVIDENT LABEL of LeghornGroup is specifically designed to provide evidence of unauthorised tampering. LeghornGroup VOID LABEL can be applied both on smooth and rough surfaces. Once the Void tamper evident security label has been removed from the surface, it leaves a film behind showing a void/open message as evidence of tampering.

Numbering

These labels are supplied in different sizes and have all a progressive numbering.
The provide a high level of security by leaving a void message on the surface they have been applied to.
They can be used for different purposes that require a high level of security.

Where to apply labels

Void tamper evident security labels are widely used by hardware and mechanical objects manufacturers. In addition, also repair workshop and assistance laboratories use them. These labels have also a great importance for pharmaceutical industry, both for sealing special drug boxes and for laboratory test tubes.

In the transport field, these labels are used to seal boxes.
Void tamper evident labels are also used to ensure products authenticity.
An intact void security label guarantees that the product to which it has been applied to has not been tampered with.
It is also recommended to use a progressive numbering and note where the label has been applied to.

Examples of realisation

LeghornGroup can satisfy any customer’s requirement, from labels size, colours and shake. Void tamper evident security labels can be printed with logo, barcode and progressive numbering. LeghornGroup technicians are always at your disposal for any request concerning VOID security labels.

STANDARD SIZES
20×11 mm
30×20 mm
40×20 mm
50×20 mm
60×30 mm
80×30 mm
80×40 mm
100×40 mm
120×50 mm
150×75 mm
200×80 mm

MATERIAL
Paper
Polyetilene

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Void tamper evident label with residue appeared first on LeghornGroup India.

How to use: T.o attach the void label seal in a perfect fitting way, the surface where it gets stuck on has to be perfectly cleaned. Once positioned in the right way, you have to pass over it with your hand.

Due to its special composition when one removing  the label appears clearly visible multilingual writing on the container showing that it was opened.

The message remains clearly visible as well, if somebody tries to put the label on the container  again.

TECHNICAL DRAWING

CORRECT POSITION ON THE CONTAINER

RECOMMENDED SIZE
75×175 mm

MATERIAL
Paper
Polyetilene

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Container VOID label seal appeared first on LeghornGroup India.

SIZE
Diam: 3,3 mm (¹⁄₈”)
Length: 315 (12” ¹³⁄₃₂”)
Label: 22 x 50 mm (⁵⁵⁄₆₄” x 1” ³¹⁄₃₂”)

TECHNICAL DRAWING

MATERIAL
Polypropylene

COLOURS

MARKING OPTIONS
– INK TRANSFER PRINT
– Laser print
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
1.000 seals per carton – strip 10 pcs
carton size: 56 x 33 x 19 cm (22” ³⁄₆₄” x 12” ⁶³⁄₆₄” x 7” ³¹⁄₆₄”)
carton weigth: 3,5 kg (7lb)

RELATED PRODUCTS

The post ADJUSTSEAL 3,3×315 mm appeared first on LeghornGroup India.