Security meter seal TWIST SEAL
Security meter seal. Tamper evident twist type seal for electric, gas and water meters. Seal supplied both with and without sealing wire
Description
Security meter seal TWIST SEAL
Completely plastic seal supplied both with and without sealing wire. The exterior part is made of transparent plastic for better controlling the locking mechanism. To secure rotate 360° the handle of the seal. Once closed, it is recommended to snap off the handle. It is impossible to tamper the seal once it is secured.
Types of printing:
Standard |
Double numbering |
Barcode |
Data Matrix |
The following sealing wires are suitable for TWIST SEAL:
– galvanised sealing wire
– stainless steel
– brass
– copper
– nylon copper
TECHNICAL DRAWING
MATERIAL
Polycarbonate
ABS
COLORS & CUSTOMIZATIONS
SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief
PACKAGING
Plastic bags of 100 pcs in boxes of 2000 pcs each.
Size: 40×30×20 cm
Box weight: 7 kg
Examples of use
TRUCK:
1) The TWIST SEAL wire seal is particularly suitable for difficult closures. Insert the spiral wire into the closing hole of the truck…
2) Insert the same spiral wire in the second hole
Seal and turn the red lever several times …
3) In this way the sealing of the truck is obtained
Although it is designed with very small steps.
This wire seal is very robust and cannot be accidentally broken.
4) To remove the seal, just cut the spiral wire with a simple wire cutter.
BOTTLES:
1) The TWIST SEAL wire seal is particularly suitable for difficult closures. Insert the spiral wire into the hole of the bottle cap for sampling …
2) Then pass the same spiral wire through the hole
Located on the body of the bottle for sampling …
3) Insert the spiral wire into the free hole of the TWIST SEAL wire seal and turn the green lever several times. By doing so, the safe sealing of the bottle is obtained by sampling.
4) Different models of sampling bottles sealed with wire seals model TWIST SEAL.
COUNTERS:
1) The TWIST SEAL wire seal is particularly suitable for closings of water, electricity and gas meters. Insert the spiral wire into the appropriate hole in the recocordo …
2) Then pass the same spiral wire through the hole
Located on the body of the counter …
3) Insert the spiral wire into the free hole of the TWIST SEAL wire seal and turn the green lever several times. By doing this, the meter is sealed securely.
4) To remove the seal, cut it with a simple wire cutter.
You may also like…
-
UHF/HF/NFC RFID Meter seal ANCHORFLAG
Wire seal embedding UHF, HF or NFC tag for automatic identification function
-
Meter seal ANCHORCLICK SEAL with wire in-ya
Transparent body to enable visibility of any tampering.
-
Meter seal ANCHORCLICK SEAL in-ya
Anchor for strong holding of the parts.